my blog my blog

Tag: OpenResty
一个openai的ChatGPT反向代理实现

在奶牛看来,用api的同时保护自己不被暴露的安全性是最重要的。ChatGPT最近老火了,虽然奶牛还没用上4.0,一直在排队,但是也写点儿东西来弥补一下这个曾经没什么作品的遗憾吧。一直以来都没有发不过什么作品,这次写了个docker来实现这个反代。以OpenResty,通过lua来做安全验证防护,通过Nginx的proxy来反代。

使用方法:

docker pull nenew/openai-api
docker run -itd --name api-server -p 127.0.0.1:811:80 nenew/openai-api

你的openai反代地址: http://127.0.0.1:811
通过绑定到本地端口,可以阻止服务器被公众访问。
如果想让你的api反代服务器被公开,你也可以通过-e选项来绑定一个可以访问的IP或者设置一个密码来保证只有自己可以使用。

docker run -itd --name api-server -p 811:80 -e BIND_IP="123.123.123.123" nenew/openai-api
docker run -itd --name api-server -p 811:80 -e SECRET="Your secret" nenew/openai-api

注意:如果你设置了SECRET环境变量,你还需要设置你的app的请求头,增加X-Secret来完成验证:

X-Secret:Your secret

 测试:

访问 http://127.0.0.1/status 你可以看到你的请求头、请求体、设置的IP、设置的密码以及响应头的具体信息.
你也可以设置你的app的api到这个页面来进行测试或者使用Nginx的proxy_pass来设置转发。

proxy_pass http://1277.0.0.1/status

为什么你的反代不安全

其实写这个docker的原因很简单,看到很多不安全因素存在在你们的自建api里面。
首先你们没有去掉或者掩盖[“X-Real-IP”]和[“X-Forwarded-For”]。
反向代理的作用是保护目标服务器,但是我们其实想通过反代保护我们自己来保障我们的app可以正常的访问,所以完全没有必要把我们的X-Real-IP和X-Forwarded-For给目标服务器。我们建立反代其实目的是建立一个正向代理。这两个参数明显会暴露我们自己的真实IP,造成api的key多人使用的问题。
其次,很多人自建的api谁都可以用,比如像那些利用serverless实现的反代,你的访问IP地址每次都可能变化,那样子你的api key很可能就被判定为滥用【remote_addr一直是变化的】。我这个docker可以通过设置绑定IP和SECRET来阻止外界访问。
我认为最安全的方案应该是:
把这个docker放在你的独立服务器或者VPS上,你可以设置你的web app也在同一台服务器上,当然你也可以设置你的app来通过加密或者绑定IP的方式来达到隐藏自己的目的。

使用Nginx Lua阻止对服务器IP的80/443端口直接访问

Lua作为Nginx服务器的脚本扩充非常好用,而且性能也很好。如果要使用Nginx Lua阻止对服务器IP的80/443端口直接访问,我们可以对nginx.conf进行如下设置

location / {
access_by_lua_block{
	if ( ngx.var.host ~= "www.nenew.net" ) then 
		ngx.exit(444)
	end
                    }
             }

其中的ngx.var.host代表目标域名,有几个变量可能会发生混淆:

ngx.var.server_name对应server_name:www.nenew.net
ngx.var.host对应host:test1.nenew.net
ngx.var.hostname对应hostname:nenew

这里我们就看啊,如果我们把IP绑定给其它域名,或者对方直接用hosts来进行dns解析,改变的是ngx.var.host,这个是访问者的目标域名,是变化的,所以这里block是针对的ngx.var.host,只要判定不相同即无法访问,我们直接给一个444状态,切断连接不响应。hostname是主机名,这里没有什么用,ngx.var.server_name变量是绑定域名,不能用绑定域名来判定,因为绑定域名会变,但是访问域名可能会造成改变。

Ubuntu18.04编译安装PHP7.3.8

奶牛在踩坑过程中,请不要阻止。身为一个站长,一路以来一直使用LNMP来安装LNMP环境,深感羞耻,打算把该踩的坑都踩一踩,也学习一下该学习的东西。

今天是把OpenResty+PHP+Mysql的坑都踩了一遍,学到了不少东西,与君共勉。

需求环境安装

build-essential libcurl14 libcurl4-gnutls-dev openssl curl libbz2-dev libxml2-dev libjpeg-dev libpng-dev libfreetype6-dev libzip-dev libxslt1-dev

下载PHP7.3.8

wget https://www.php.net/distributions/php-7.3.8.tar.gz

解压

tar xzvf php-7.3.8.tar.gz

进入目录

cd php-7.3.8

编译安装

./configure --prefix=/usr/local/php --with-config-file-path=/usr/local/php/etc --with-config-file-scan-dir=/usr/local/php/conf.d --enable-fpm --with-fpm-user=www --with-fpm-group=www --enable-mysqlnd --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --with-iconv-dir --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --enable-mbregex --enable-mbstring --enable-intl --enable-ftp --with-gd --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-xmlrpc --enable-zip --enable-soap --with-gettext  --enable-opcache --with-xsl
make
make test
make install
mkdir -p /usr/local/php/{etc,conf.d}
cp php.ini-production /usr/local/php/etc/php.ini
cp sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm
chmod +x /etc/init.d/php-fpm
update-rc.d php-fpm default

防止Failed to start php.service: Unit php-fpm.service not found.类错误发生。

配置文件php.ini

贴上现有的配置,改自LNMP。

engine = On
short_open_tag = On
precision = 14
output_buffering = 4096
zlib.output_compression = Off
implicit_flush = Off
unserialize_callback_func =
serialize_precision = -1
disable_functions = passthru,exec,system,chroot,chgrp,chown,shell_exec,proc_open,proc_get_status,popen,ini_alter,ini_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream_socket_server
disable_classes =
zend.enable_gc = On
expose_php = On
max_execution_time = 300
max_input_time = 60
memory_limit = 128M
error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
display_errors = Off
display_startup_errors = Off
log_errors = On
log_errors_max_len = 1024
ignore_repeated_errors = Off
ignore_repeated_source = Off
report_memleaks = On
html_errors = On
variables_order = "GPCS"
request_order = "GP"
register_argc_argv = Off
auto_globals_jit = On
post_max_size = 50M
auto_prepend_file =
auto_append_file =
default_mimetype = "text/html"
default_charset = "UTF-8"
doc_root =
user_dir =
enable_dl = Off
cgi.fix_pathinfo=0
file_uploads = On
upload_max_filesize = 50M
max_file_uploads = 20
allow_url_fopen = On
allow_url_include = Off
default_socket_timeout = 60
extension=fileinfo
[CLI Server]
cli_server.color = On

[Date]
date.timezone = PRC
[filter]
[iconv]
[intl]
[sqlite3]
[Pcre]
[Pdo]
[Pdo_mysql]
pdo_mysql.cache_size = 2000
pdo_mysql.default_socket=
[Phar]
[mail function]
SMTP = localhost
smtp_port = 25
mail.add_x_header = Off
[ODBC]
odbc.allow_persistent = On
odbc.check_persistent = On
odbc.max_persistent = -1
odbc.max_links = -1
odbc.defaultlrl = 4096
odbc.defaultbinmode = 1
[Interbase]
ibase.allow_persistent = 1
ibase.max_persistent = -1
ibase.max_links = -1
ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
ibase.dateformat = "%Y-%m-%d"
ibase.timeformat = "%H:%M:%S"
[MySQLi]
mysqli.max_persistent = -1
mysqli.allow_persistent = On
mysqli.max_links = -1
mysqli.cache_size = 2000
mysqli.default_port = 3306
mysqli.default_socket =
mysqli.default_host =
mysqli.default_user =
mysqli.default_pw =
mysqli.reconnect = Off
[mysqlnd]
mysqlnd.collect_statistics = On
mysqlnd.collect_memory_statistics = Off
[OCI8]
[PostgreSQL]
pgsql.allow_persistent = On
pgsql.auto_reset_persistent = Off
pgsql.max_persistent = -1
pgsql.max_links = -1
pgsql.ignore_notice = 0
pgsql.log_notice = 0
[bcmath]
bcmath.scale = 0
[browscap]
[Session]
session.save_handler = files
session.use_strict_mode = 0
session.use_cookies = 1
session.use_only_cookies = 1
session.name = PHPSESSID
session.auto_start = 0
session.cookie_lifetime = 0
session.cookie_path = /
session.cookie_domain =
session.cookie_httponly =
session.serialize_handler = php
session.gc_probability = 1
session.gc_divisor = 1000
session.gc_maxlifetime = 1440
session.referer_check =
session.cache_limiter = nocache
session.cache_expire = 180
session.use_trans_sid = 0
session.sid_length = 26
session.trans_sid_tags = "a=href,area=href,frame=src,form="
session.sid_bits_per_character = 5
[Assertion]
zend.assertions = -1
[COM]
[mbstring]
[gd]
[exif]
[Tidy]
tidy.clean_output = Off
[soap]
soap.wsdl_cache_enabled=1
soap.wsdl_cache_dir="/tmp"
soap.wsdl_cache_ttl=86400
soap.wsdl_cache_limit = 5
[sysvshm]
[ldap]
ldap.max_links = -1
[dba]
[opcache]
[zend opcache]
zend_extension="/usr/local/php/lib/php/extensions/no-debug-non-zts-20180731/opcache.so"
opcache.force_restart_timeout=3600
opcache.memory_consumption=128
opcache.interned_strings_buffer=8
opcache.max_accelerated_files=4000
opcache.revalidate_freq=60
opcache.fast_shutdown=1
opcache.enable=1
opcache.enable_cli=1
[curl]
[openssl]

关于fileinfo

这个默认是安装的,但是有说内存小于1G是不推荐安装的,编译会出错,但是fileinfo很有用,有些程序需要使用fileinfo,未安装会导致500错误。可以在configiure的时候使用–disable-fileinfo参数来禁止安装,但是没有–enable-fileinfo参数哦。

关于fileinfo手动安装

cd ./ext/fileinfo/
apt install autoconf
/usr/local/php/bin/phpize
./configure –with-php-config=/usr/local/php/bin/php-config
make
make install

最后修改php.ini添加extension=fileinfo即可。

PHP configure参数详细列表

如下,以便速查

~/php/php-7.3.8# ./configure --help
`configure' configures this package to adapt to many kinds of systems.

Usage: ./configure [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE.  See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:
  -h, --help              display this help and exit
      --help=short        display options specific to this package
      --help=recursive    display the short help of all the included packages
  -V, --version           display version information and exit
  -q, --quiet, --silent   do not print `checking ...' messages
      --cache-file=FILE   cache test results in FILE [disabled]
  -C, --config-cache      alias for `--cache-file=config.cache'
  -n, --no-create         do not create output files
      --srcdir=DIR        find the sources in DIR [configure dir or `..']

Installation directories:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [/usr/local]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [PREFIX]

By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc.  You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.

For better control, use the options below.

Fine tuning of the installation directories:
  --bindir=DIR            user executables [EPREFIX/bin]
  --sbindir=DIR           system admin executables [EPREFIX/sbin]
  --libexecdir=DIR        program executables [EPREFIX/libexec]
  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
  --runstatedir=DIR       modifiable per-process data [LOCALSTATEDIR/run]
  --libdir=DIR            object code libraries [EPREFIX/lib]
  --includedir=DIR        C header files [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
  --infodir=DIR           info documentation [DATAROOTDIR/info]
  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
  --mandir=DIR            man documentation [DATAROOTDIR/man]
  --docdir=DIR            documentation root [DATAROOTDIR/doc/PACKAGE]
  --htmldir=DIR           html documentation [DOCDIR]
  --dvidir=DIR            dvi documentation [DOCDIR]
  --pdfdir=DIR            pdf documentation [DOCDIR]
  --psdir=DIR             ps documentation [DOCDIR]

System types:
  --build=BUILD     configure for building on BUILD [guessed]
  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
  --target=TARGET   configure for building compilers for TARGET [HOST]

Optional Features and Packages:
  --disable-option-checking  ignore unrecognized --enable/--with options
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-libdir=NAME      Look for libraries in .../NAME rather than .../lib
  --disable-rpath         Disable passing additional runtime library
                          search paths
  --enable-re2c-cgoto     Enable -g flag to re2c to use computed goto gcc extension
  --disable-gcc-global-regs
                          whether to enable GCC global register variables

SAPI modules:

  --with-apxs2=FILE       Build shared Apache 2.0 Handler module. FILE is the optional
                          pathname to the Apache apxs tool apxs
  --disable-cli           Disable building CLI version of PHP
                          (this forces --without-pear)
  --enable-embed=TYPE     EXPERIMENTAL: Enable building of embedded SAPI library
                          TYPE is either 'shared' or 'static'. TYPE=shared
  --enable-fpm            Enable building of the fpm SAPI executable
  --with-fpm-user=USER    Set the user for php-fpm to run as. (default: nobody)
  --with-fpm-group=GRP    Set the group for php-fpm to run as. For a system user, this
                          should usually be set to match the fpm username (default: nobody)
  --with-fpm-systemd      Activate systemd integration
  --with-fpm-acl          Use POSIX Access Control Lists
  --with-litespeed        Build PHP as litespeed module
  --enable-phpdbg         Build phpdbg
  --enable-phpdbg-webhelper
                          Build phpdbg web SAPI support
  --enable-phpdbg-debug   Build phpdbg in debug mode
  --enable-phpdbg-readline   Enable readline support in phpdbg (depends on static ext/readline)
  --disable-cgi           Disable building CGI version of PHP
  --with-valgrind=DIR     Enable valgrind support

General settings:

  --enable-gcov           Enable GCOV code coverage (requires LTP) - FOR DEVELOPERS ONLY!!
  --enable-debug          Compile with debugging symbols
  --with-layout=TYPE      Set how installed files will be laid out.  Type can
                          be either PHP or GNU [PHP]
  --with-config-file-path=PATH
                          Set the path in which to look for php.ini [PREFIX/lib]
  --with-config-file-scan-dir=PATH
                          Set the path where to scan for configuration files
  --enable-sigchild       Enable PHP's own SIGCHLD handler
  --enable-libgcc         Enable explicitly linking against libgcc
  --disable-short-tags    Disable the short-form <? start tag by default
  --enable-dmalloc        Enable dmalloc
  --disable-ipv6          Disable IPv6 support
  --enable-dtrace         Enable DTrace support
  --enable-fd-setsize     Set size of descriptor sets

Extensions:

  --with-EXTENSION=shared[,PATH]

    NOTE: Not all extensions can be build as 'shared'.

    Example: --with-foobar=shared,/usr/local/foobar/

      o Builds the foobar extension as shared extension.
      o foobar package install prefix is /usr/local/foobar/


  --disable-all           Disable all extensions which are enabled by default

  --disable-libxml        Disable LIBXML support
  --with-libxml-dir=DIR   LIBXML: libxml2 install prefix
  --with-openssl=DIR      Include OpenSSL support (requires OpenSSL >= 1.0.1)
  --with-kerberos=DIR     OPENSSL: Include Kerberos support
  --with-system-ciphers   OPENSSL: Use system default cipher list instead of hardcoded value
  --with-pcre-regex=DIR   Include Perl Compatible Regular Expressions support.
                          DIR is the PCRE install prefix BUNDLED
  --with-pcre-jit         Enable PCRE JIT functionality (BUNDLED only)
  --with-pcre-valgrind=DIR
                          Enable PCRE valgrind support. Developers only!
  --without-sqlite3=DIR   Do not include SQLite3 support. DIR is the prefix to
                          SQLite3 installation directory.
  --with-zlib=DIR         Include ZLIB support (requires zlib >= 1.2.0.4)
  --with-zlib-dir=<DIR>   Define the location of zlib install directory
  --enable-bcmath         Enable bc style precision math functions
  --with-bz2=DIR          Include BZip2 support
  --enable-calendar       Enable support for calendar conversion
  --disable-ctype         Disable ctype functions
  --with-curl=DIR         Include cURL support
  --enable-dba            Build DBA with bundled modules. To build shared DBA
                          extension use --enable-dba=shared
  --with-qdbm=DIR         DBA: QDBM support
  --with-gdbm=DIR         DBA: GDBM support
  --with-ndbm=DIR         DBA: NDBM support
  --with-db4=DIR          DBA: Oracle Berkeley DB 4.x or 5.x support
  --with-db3=DIR          DBA: Oracle Berkeley DB 3.x support
  --with-db2=DIR          DBA: Oracle Berkeley DB 2.x support
  --with-db1=DIR          DBA: Oracle Berkeley DB 1.x support/emulation
  --with-dbm=DIR          DBA: DBM support
  --with-tcadb=DIR        DBA: Tokyo Cabinet abstract DB support
  --with-lmdb=DIR         DBA: Lightning memory-mapped database support
  --without-cdb=DIR       DBA: CDB support (bundled)
  --disable-inifile       DBA: INI support (bundled)
  --disable-flatfile      DBA: FlatFile support (bundled)
  --disable-dom           Disable DOM support
  --with-libxml-dir=DIR   DOM: libxml2 install prefix
  --with-enchant=DIR      Include enchant support.
                          GNU Aspell version 1.1.3 or higher required.
  --enable-exif           Enable EXIF (metadata from images) support
  --disable-fileinfo      Disable fileinfo support
  --disable-filter        Disable input filter support
  --with-pcre-dir         FILTER: pcre install prefix
  --enable-ftp            Enable FTP support
  --with-openssl-dir=DIR  FTP: openssl install prefix
  --with-gd=DIR           Include GD support.  DIR is the GD library base
                          install directory BUNDLED
  --with-webp-dir=DIR     GD: Set the path to libwebp install prefix
  --with-jpeg-dir=DIR     GD: Set the path to libjpeg install prefix
  --with-png-dir=DIR      GD: Set the path to libpng install prefix
  --with-zlib-dir=DIR     GD: Set the path to libz install prefix
  --with-xpm-dir=DIR      GD: Set the path to libXpm install prefix
  --with-freetype-dir=DIR GD: Set the path to FreeType 2 install prefix
  --enable-gd-jis-conv    GD: Enable JIS-mapped Japanese font support
  --with-gettext=DIR      Include GNU gettext support
  --with-gmp=DIR          Include GNU MP support
  --with-mhash=DIR        Include mhash support
  --disable-hash          Disable hash support
  --without-iconv=DIR     Exclude iconv support
  --with-imap=DIR         Include IMAP support. DIR is the c-client install prefix
  --with-kerberos=DIR     IMAP: Include Kerberos support. DIR is the Kerberos install prefix
  --with-imap-ssl=DIR     IMAP: Include SSL support. DIR is the OpenSSL install prefix
  --with-interbase=DIR    Include Firebird support.  DIR is the Firebird base
                          install directory /opt/firebird
  --enable-intl           Enable internationalization support
  --with-icu-dir=DIR      Specify where ICU libraries and headers can be found
  --disable-json          Disable JavaScript Object Serialization support
  --with-ldap=DIR         Include LDAP support
  --with-ldap-sasl=DIR    LDAP: Include Cyrus SASL support
  --enable-mbstring       Enable multibyte string support
  --disable-mbregex       MBSTRING: Disable multibyte regex support
  --disable-mbregex-backtrack
                          MBSTRING: Disable multibyte regex backtrack check
  --with-onig=DIR         MBSTRING: Use external oniguruma. DIR is the oniguruma install prefix.
                          If DIR is not set, the bundled oniguruma will be used
  --with-mysqli=FILE      Include MySQLi support.  FILE is the path
                          to mysql_config.  If no value or mysqlnd is passed
                          as FILE, the MySQL native driver will be used
  --enable-embedded-mysqli
                          MYSQLi: Enable embedded support
                          Note: Does not work with MySQL native driver!
  --with-mysql-sock=SOCKPATH
                          MySQLi/PDO_MYSQL: Location of the MySQL unix socket pointer.
                          If unspecified, the default locations are searched
  --with-oci8=DIR         Include Oracle Database OCI8 support. DIR defaults to $ORACLE_HOME.
                          Use --with-oci8=instantclient,/path/to/instant/client/lib
                          to use an Oracle Instant Client installation
  --with-odbcver=HEX      Force support for the passed ODBC version. A hex number is expected, default 0x0350.
                          Use the special value of 0 to prevent an explicit ODBCVER to be defined.
  --with-adabas=DIR       Include Adabas D support /usr/local
  --with-sapdb=DIR        Include SAP DB support /usr/local
  --with-solid=DIR        Include Solid support /usr/local/solid
  --with-ibm-db2=DIR      Include IBM DB2 support /home/db2inst1/sqllib
  --with-empress=DIR      Include Empress support \$EMPRESSPATH
                          (Empress Version >= 8.60 required)
  --with-empress-bcs=DIR  Include Empress Local Access support \$EMPRESSPATH
                          (Empress Version >= 8.60 required)
  --with-custom-odbc=DIR  Include user defined ODBC support. DIR is ODBC install base
                          directory /usr/local. Make sure to define CUSTOM_ODBC_LIBS and
                          have some odbc.h in your include dirs. f.e. you should define
                          following for Sybase SQL Anywhere 5.5.00 on QNX, prior to
                          running this configure script:
                            CPPFLAGS=\"-DODBC_QNX -DSQLANY_BUG\"
                            LDFLAGS=-lunix
                            CUSTOM_ODBC_LIBS=\"-ldblib -lodbc\"
  --with-iodbc=DIR        Include iODBC support /usr/local
  --with-esoob=DIR        Include Easysoft OOB support /usr/local/easysoft/oob/client
  --with-unixODBC=DIR     Include unixODBC support /usr/local
  --with-dbmaker=DIR      Include DBMaker support
  --disable-opcache       Disable Zend OPcache support
  --disable-opcache-file  Disable file based caching
  --disable-huge-code-pages
                          Disable copying PHP CODE pages into HUGE PAGES
  --enable-pcntl          Enable pcntl support (CLI/CGI only)
  --disable-pdo           Disable PHP Data Objects support
  --with-pdo-dblib=DIR    PDO: DBLIB-DB support.  DIR is the FreeTDS home directory
  --with-pdo-firebird=DIR PDO: Firebird support.  DIR is the Firebird base
                          install directory /opt/firebird
  --with-pdo-mysql=DIR    PDO: MySQL support. DIR is the MySQL base directory
                          If no value or mysqlnd is passed as DIR, the
                          MySQL native driver will be used
  --with-zlib-dir=DIR     PDO_MySQL: Set the path to libz install prefix
  --with-pdo-oci=DIR      PDO: Oracle OCI support. DIR defaults to $ORACLE_HOME.
                          Use --with-pdo-oci=instantclient,/path/to/instant/client/lib
                          for an Oracle Instant Client installation.
  --with-pdo-odbc=flavour,dir
                          PDO: Support for 'flavour' ODBC driver.
			  include and lib dirs are looked for under 'dir'.

			  'flavour' can be one of:  ibm-db2, iODBC, unixODBC, generic
			  If ',dir' part is omitted, default for the flavour
			  you have selected will be used. e.g.:

			    --with-pdo-odbc=unixODBC

			  will check for unixODBC under /usr/local. You may attempt
			  to use an otherwise unsupported driver using the 'generic'
			  flavour.  The syntax for generic ODBC support is:

			    --with-pdo-odbc=generic,dir,libname,ldflags,cflags

			  When built as 'shared' the extension filename is always pdo_odbc.so
  --with-pdo-pgsql=DIR    PDO: PostgreSQL support.  DIR is the PostgreSQL base
                          install directory or the path to pg_config
  --without-pdo-sqlite=DIR
                          PDO: sqlite 3 support.  DIR is the sqlite base
                          install directory BUNDLED
  --with-pgsql=DIR        Include PostgreSQL support.  DIR is the PostgreSQL
                          base install directory or the path to pg_config
  --disable-phar          Disable phar support
  --disable-posix         Disable POSIX-like functions
  --with-pspell=DIR       Include PSPELL support.
                          GNU Aspell version 0.50.0 or higher required
  --with-libedit=DIR      Include libedit readline replacement (CLI/CGI only)
  --with-readline=DIR     Include readline support (CLI/CGI only)
  --with-recode=DIR       Include recode support
  --disable-session       Disable session support
  --with-mm=DIR           SESSION: Include mm support for session storage
  --enable-shmop          Enable shmop support
  --disable-simplexml     Disable SimpleXML support
  --with-libxml-dir=DIR   SimpleXML: libxml2 install prefix
  --with-snmp=DIR         Include SNMP support
  --with-openssl-dir=DIR  SNMP: openssl install prefix
  --enable-soap           Enable SOAP support
  --with-libxml-dir=DIR   SOAP: libxml2 install prefix
  --enable-sockets        Enable sockets support
  --with-sodium=DIR       Include sodium support
  --with-password-argon2=DIR
                          Include Argon2 support in password_*. DIR is the Argon2 shared library path
  --enable-sysvmsg        Enable sysvmsg support
  --enable-sysvsem        Enable System V semaphore support
  --enable-sysvshm        Enable the System V shared memory support
  --with-tidy=DIR         Include TIDY support
  --disable-tokenizer     Disable tokenizer support
  --enable-wddx           Enable WDDX support
  --with-libxml-dir=DIR   WDDX: libxml2 install prefix
  --with-libexpat-dir=DIR WDDX: libexpat dir for XMLRPC-EPI (deprecated)
  --disable-xml           Disable XML support
  --with-libxml-dir=DIR   XML: libxml2 install prefix
  --with-libexpat-dir=DIR XML: libexpat install prefix (deprecated)
  --disable-xmlreader     Disable XMLReader support
  --with-libxml-dir=DIR   XMLReader: libxml2 install prefix
  --with-xmlrpc=DIR       Include XMLRPC-EPI support
  --with-libxml-dir=DIR   XMLRPC-EPI: libxml2 install prefix
  --with-libexpat-dir=DIR XMLRPC-EPI: libexpat dir for XMLRPC-EPI (deprecated)
  --with-iconv-dir=DIR    XMLRPC-EPI: iconv dir for XMLRPC-EPI
  --disable-xmlwriter     Disable XMLWriter support
  --with-libxml-dir=DIR   XMLWriter: libxml2 install prefix
  --with-xsl=DIR          Include XSL support.  DIR is the libxslt base
                          install directory (libxslt >= 1.1.0 required)
  --enable-zend-test      Enable zend-test extension
  --enable-zip            Include Zip read/write support
  --with-zlib-dir=DIR     ZIP: Set the path to libz install prefix
  --with-pcre-dir         ZIP: pcre install prefix
  --with-libzip=DIR       ZIP: use libzip
  --enable-mysqlnd        Enable mysqlnd explicitly, will be done implicitly
                          when required by other extensions
  --disable-mysqlnd-compression-support
                          Disable support for the MySQL compressed protocol in mysqlnd
  --with-zlib-dir=DIR     mysqlnd: Set the path to libz install prefix

PEAR:

  --with-pear=DIR         Install PEAR in DIR [PREFIX/lib/php]
  --without-pear          Do not install PEAR

Zend:

  --enable-maintainer-zts Enable thread safety - for code maintainers only!!
  --disable-inline-optimization
                          If building zend_execute.lo fails, try this switch
  --disable-zend-signals  whether to enable zend signal handling

TSRM:

  --with-tsrm-pth=pth-config
                          Use GNU Pth
  --with-tsrm-st          Use SGI's State Threads
  --with-tsrm-pthreads    Use POSIX threads (default)

Libtool:

  --enable-shared=PKGS    Build shared libraries default=yes
  --enable-static=PKGS    Build static libraries default=yes
  --enable-fast-install=PKGS
                          Optimize for fast installation default=yes
  --with-gnu-ld           Assume the C compiler uses GNU ld default=no
  --disable-libtool-lock  Avoid locking (might break parallel builds)
  --with-pic              Try to use only PIC/non-PIC objects default=use both
  --with-tags=TAGS        Include additional configurations automatic


Some influential environment variables:
  CC          C compiler command
  CFLAGS      C compiler flags
  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
              nonstandard directory <lib dir>
  LIBS        libraries to pass to the linker, e.g. -l<library>
  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
              you have headers in a nonstandard directory <include dir>
  CPP         C preprocessor
  YACC        The `Yet Another Compiler Compiler' implementation to use.
              Defaults to the first program found out of: `bison -y', `byacc',
              `yacc'.
  YFLAGS      The list of arguments that will be passed by default to $YACC.
              This script will default YFLAGS to the empty string to avoid a
              default value of `-d' given by some make applications.
  CXX         C++ compiler command
  CXXFLAGS    C++ compiler flags
  CXXCPP      C++ preprocessor

Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.

Report bugs to the package provider.

 

 

Ubuntu安装配置OpenResty教程及补充方案

Ubuntu安装OpenResty教程

# import our GPG key:
wget -qO - https://openresty.org/package/pubkey.gpg | sudo apt-key add -
# for installing the add-apt-repository command
# (you can remove this package and its dependencies later):
sudo apt-get -y install software-properties-common
# add the our official APT repository:
sudo add-apt-repository -y "deb http://openresty.org/package/debian $(lsb_release -sc) openresty"
# to update the APT index:
sudo apt-get update
sudo apt-get install openresty

执行完上面一串就安装完最新版的OpenResty了。

Ubuntu配置OpenResty教程

奶牛先说下配置文件的位置:

OpenResty启动文件:/etc/rc0.d/K01openresty
OpenResty启动文件:/etc/init.d/openresty  (ldconf openresty default会生成不同runlevel的conf,Ubuntu的默认runlevel是5)
OpenResty的Nginx配置文件:/usr/local/openresty/nginx/conf/nginx.conf
OpenResty的默认目录:/usr/local/openresty/nginx/html/

然后剩下的就可以自己安装Nginx进行配置了。

OpenResty安装补充方案 设置www用户和组

groupadd www 
useradd -g www -s /sbin/nologin www

设置/usr/local/openresty/nginx/conf/nginx.conf,添加

user  www www;
worker_processes  auto;